To get a good vehicle and good driving, the car is always well cared for continuously.
Like humans, machines also require maintenance and regular checks to be addressed if there is a damaged or in need of repair.
General examination should be performed on the car every 2 or 3 months, both for the car that had not been used or after a long journey.
Some general vehicle inspection steps, among others, include:
1. Exterior and interior
It is better if you constantly clean the exterior and interior of the vehicle from dirt, because if too long attached, it will harden the dirt and cause of the paint looks dull and flawed. While in the interior, the dirt that was not immediately cleaned will cause odor.
2. Ban
Do not forget to check tire condition and pressure developing wind.
3. Water
Always check the battery water conditions, water radiator, windshield wiper and washer water. Add if the amount is below the minimum threshold.
4. Oli
Also check the volume and quality of oil in the engine, gearbox, axle, power steering, brakes and clutch.
5. Machine
If the engine power was reduced or even voices that arise in the machine, it means you have to start to check the condition of the vehicle engine to the nearest repair shop customers.
6. Drive components
Check also various drive components, such as the clutch, gearbox, coupling, axle, axles, wheel bearings, including the wheels. Make sure the drive components are moving normally.
7. The lights
Finally, make sure all your vehicle lights from the headlights, taillights and brake lights, running perfectly, because you certainly do not want it rammed by other vehicles because the brake lights of death?
0 comments:
Post a Comment